PC1000 by Gordon Engineering

Manufacturer: Gordon Engineering
A capacitive, presence sensing device designed for machine guarding and personnel safety applications.
Features microprocessor-based electronics, automatic tuning and sensitivity adjustments, continuous self-check circuitry, warning output, enhanced relay protection (includes welded contact detection) and ability to handle up to 150 linear feet of antenna.
Input Voltage | 115 or 230 VAC, selectable; single phase;50/60 Hz; +/- 15% | Coupler | epoxy encapsulated - impervious to water, dirt & oil | ||
Power Consumption | 8 VA | Coupler Power Out | 1mW maximum | ||
Frequency Range | 160 kHz - 400 kHz | Coupler Cable | 10 feet (3m) standard - longer lengths available | ||
System Reaction | 25 mS | Indicators and Controls | mode indicators: self-check, run, tune, set alarm and antenna fault alarm light | ||
Self-Check | continuous, independent of machine cycle | bargraph: displays alarm point and sensing field | |||
Antenna Size | up to 150 linear feet (45m) or 750 pF of capacitance | keypad: reset, tune, set alarm and set warning, with access code | |||
keylock: prevents unauthorized changes of settings | |||||
Sensitivity Range | up to 28 inches (711 mm) radius from antenna depends on antenna design | Enclosure | NEMA 12, industrial plastic
10.2 inches X 6.1 inches X 4.0 inches (259mm x 154mm x 102mm) |
||
Stop Output Load Rating | resistive | 2.5A, 115 VAC | Mounting | vertical or horizontal - to any bulkhead, chassis or panel | |
resistive | 1.25A, 230 VAC | ||||
inductive | .25A, 115 VAC | ||||
inductive | .125A, 230 VAC | ||||
Stop Output Contact | normally closed, safety rated relay | Weight | 6 lbs. (2.7 Kg) | ||
Warning Output Load Rating | 8A, 115/230 VAC | Environment | unaffected by dirt, grease, vibration, etc. | ||
Warning Output Contact | normally open | temperature: 0° F - 130° F | |||
Approvals | C-UL, US Listed | humidity: 0 - 95% R. H. | |||
Listings | Tested to UL 508 & CSA C22.2 No 14-95 |