_cfimg-3611018200668991210
Genuine HANSEN Coupling Two-Way

Two Way Couplings are often used in Hydraulic Service

Available in Stainless Steel, Brass and Steel. with Female Pipe Threads

 

Hansen 2-Way Coupling Catalog

We are a factory authorized distributor of Hansen Couplings.  All of our products are brand new and covered by the Hansen warantee.

 

2 Way Couplings are most often used for hydraulic applications

and contain a shut-off valve in each end. Choose from Steel, Brass or Stainless Steel. 

You must select a mating Plug of the SAME PIPE Size below to ensure a proper fit.  

Call 800-333-5520 for other HANSEN coupling series

.

!

Hansen Sockets Two-Way Shut Off
Hansen HK Series Sockets
!
hk_so_brass_sm

Choose from Brass or Steel.


Hansen 2-Way couplings are designed to shut off on both ends when disconnected.

For a matched assembly, You must select a plug of the SAME PIPE SIZE AS THE SOCKET  to ensure a proper fit.

Hansen Plugs Two-Way Shut Off
Hansen HK Series Plugs
!
hk_pl_brass_sm

Choose from Brass or Steel

Hansen 2 Way Plugs. For a matched set, select a socket of the SAME PIPE SIZE above. 

To be used with Two-Way Sockets above.

Hansen Sockets Two- Way Stainless Steel

Hansen HK Series SS Sockets
!
sssocket
Larger picture 

For a matched assembly, Select a plug of the SAME PIPE SIZE below

From $39.95 for the 1/4 size.  Other sizes available at additional cost

These Hansen Coupling Sockets are entirely made from 303 Stainless Steel

Hansen Plugs Two-Way Stainless Steel
From
Hansen HK Series SS Plugs
!
sscoup
Larger picture 

 

For a matched assembly, Select a Socket of the same pipe size above

from $14.95 for the 1/4 size.  Other sizes available at additional cost.

 

These Hansen Plugs are made entirely of 303 Stainless Steel

Hansen Couplings ISO 16028 Flush Face
Flush Face Couplings
!
_cfimg9003508680421358883

Hansen Flush Face Hydraulic Couplings

This Two-Way Coupling is a flat face, dry break (minimum spill), hydraulic device that meets or exceeds the ISO 16028 standard. The flat face coupling is ideal for applications where hydraulic spillage is a concern and interchangeability with other manufacturers is important. The device has a standard sleeve lock feature to prevent accidental disconnection and an easy, push-to-connect design. It operates at a 5075 psi maximum operating pressure and has excellent mechanical performance. Dust caps and dust plugs are available accessories.