Our IAI ROBO Cylinders® are highly efficient electric actuators that will cut down on running costs and give you substantial ROI. Not only will you save on energy costs but ROBO Cylinders® typically last 10 times longer than similar air cylinders. Why stop there? Here are 7 more benefits that you need to know about.
This product is offered for sale in PA, NJ, DE and MD Only.
Electromechanical Alternative to Pneumatic Cylinders
The ROBO Cylinder® electric actuator is a flexible, intelligent, and economical, ballscrew linear actuator from Intelligent Actuator. The ROBO Cylinder ® offers:
- Multiple Positioning
- ±.02 mm Repeatability
- Programmable Velocity Control
- Programmable Acceleration & Deceleration
- Programmable Torque Control (Push Function)
- 50 mm to 1000 mm Stroke Lengths
- 1 mm/s to 1000 mm/s Speed (Depends on Model)
- Serial I/O for linking up to 16 axes
- Long life expectancy (5,000 km)
- Low Power Consumption (Compared to Air Cylinder Compressors)
- A One-Year Warranty
- Prices start as low as $560
ERC-SA6C Lead and Load Capacity
|
Model |
Lead (mm) |
Maximum load capacity* |
Stroke (mm) |
| Horizontal (kg) |
Vertical (kg) |
| ERC2-SA6C-I-PM-12-(1)-(2)-(3)-(4) |
12 |
~6 |
~1.5 |
50-600 |
| ERC2-SA6C-I-PM-6-(1)-(2)-(3)-(4) |
6 |
12 |
~3 |
| ERC2-SA6C-I-PM-3-(1)-(2)-(3)-(4) |
3 |
12 |
~6 |
*Take note that the maximum load capacity will decrease as the speed increases.
ERC-SA6C Stroke and Maximum Speed
|
Lead |
Stroke |
50-600 mm |
600 mm |
|
12 |
600 |
515 |
|
6 |
300 |
255 |
|
3 |
150 |
125 |
(Unit: mm/s)
ERC-SA6C Specs
|
Item |
Description |
|
Drive Method |
Ball screw ?10mm, rolled C10 |
|
Positioning Repeatability |
±0.05mm |
|
Backlash |
0.1mm or less |
|
Allowable Load Moment |
Ma: 8.9N ? m Mb: 12.7N ? m Mc: 18.6N ? m |
|
Overhang Load Length |
Ma direction: 150mm or less, Mb/Mc directions: 150mm or less |
|
Ambient Operating Temp/Humidity |
0-40 °C, 85% RH or below (non-condensing) |
|
ERC2-SA6C Options
| Name |
Model |
Page |
|
Brake |
B |
|
|
Reversed-home specification |
NM |
|
ERC-SA6C Correlation Diagram of Speed and Load Capacity
 |
(1) When the stroke increases, the maximum speed will drop to prevent the ball screw from reaching a critical speed. Use the actuator specification table below to check the maximum speed at the stroke you desire.
(2) The ERC2 series uses a pulse motor, so the load capacity will decrease as the speed increases. Use the correlation diagram of speed and load capacity on the right to check the load capacity corresponding to the speed you desire.
(3) The load capacity is based on operation at an acceleration of 0.3G (or 0.2G if the lead is 3 or the actuator is operated vertically). This is the maximum acceleration. | |
