T6 is a complete machine control system that is ultra easy to program and low cost too! Absolutely no training or programming experience is required.
Only $239 for the Complete Start-Up Kit!
The T6 is programed by choosing words from a menu that form sentences of a page. Naturally, you write program in the same order as the machine operates. This allows the T6 to use just a few simple functions, since program execution is already organized. No electrical, computer or mathematical symbols are used. Even someone who didn't write the program of a T6 can still understand how it will operate!
Choose your programming method, Pocket Programmer or Windows PC Link
Trol Counter Specs:
3.2" (81.5mm) wide, 2.55" (65mm) high, 1.25" (32mm) deep
polycarbonate overlay over .058" thick aluminum face plate
.06" thick neoprene gasket seals to NEMA type 12 protection
supplied data cable is 30" (763mm) long
Display
2 line x 12 character super twist LCD, 40 degree viewing angle
character size is .25" (6.20mm) high, by .13" (3.2mm) wide
operating temperature range 0 to 50 deg. C. (32 to 120 deg. F.)
storage temperature range -20 to 70 deg. C. (-4 to 158 deg. F.)
Power Requirements
Power is supplied by the T6+ MCU via data cable, 5 volts max.
Performance
Each counter can be operated by any page, any number of times counting range is 0 to 59,999
Max. count speed is 100cps, which is limited MCU line execution
15 individual messages, containing 24 characters each
counter settings and messages are stored internally via nonvolatile eeprom which does not require battery backup.
OEM considerations:
Custom cable lengths for the RCP are available. Multiple RCP units can be "cloned" using a Program Transfer Module (part number PTM-02). This eliminates the need to setup each RCP individually. It will also store a copy of the RCP's program for backup.
Trol Timer Specs:
2 line x 12 character super twist LCD, 40 degree viewing angle character size is .25" (6.20mm) high, by .13" (3.2mm) wide
Power is supplied by the T6+ MCU via data cable, 5 volts maximum
Each timer can be operated by any page, any number of times timing range is .01 to 49,999.90 seconds in 10ms resolution
Timing accuracy is + 3ms repeatability
Timer settings and messages are stored internally via nonvolatile eeprom which does not require battery backup.
OEM considerations
Custom cable lengths for the RTP are available. Multiple RTP units can be "cloned" using a Program Transfer Module (part number PTM-02). This eliminates the need to setup each RTP individually. It will also store a copy of the RTP's program for backup.
USB-Serial Adapter
Includes Cable, Software and User Guide
