Pressure Switches

Pressure switches are used to sense the presence of a pre-determined air pressure and provide an electrical output.

 

Add to cart

This Economy Switch is still designed for multi-million cycles.  With 1/4 NPT Male Threads.  An Integral connector that plugs directly onto the switch.  Pressure adjustment is tamper resistant.  Can be wired in either normally open or normally closed configurations.

4 Amps 250 VAC

In Stock

Pressure Switches. Pressure range 14-150PSI  Max. Inlet pressure 300 PSI  Set Point Tolerance plus or minus 1 PSI

 

Add to cart

 Switch Specifications

PNP  Sourcing

Numatics DPS / DVS 280 series digital sensors can be used as a digital pressure / vacuum gauge for accurate visual display of the current value. It can also be used as a controls device designed for applications requiring extremely accurate measurement of a specific value, then generating a digital input to the PLC or controls system. The large LCD display is easy to view. It changes color indicating the set point is achieved, causing the digital output to change state. Other features include quick response ( 2.5 ms or less), repeatable to 0.2 % of full scale  1 digit, raised set buttons for simple intuitive programming of the hysteresis or window comparator modes of operation.

Applications include verification of part present, quality assurance using decay leak testing, control of edges on film winding, clamping forces, evacuate and fill circuits, pump up and down circuits and many more

 

2 Meter connection

 

Needs 4-Pin 8 mm Cable

Features:

  • Hysteresis and Window comparator modes of operation
  • Large 7 segment LCD display
  • Selectable Two Color Display (Red / Green or Green / Red)
    Large display changes color at set point achieved
  • Selectable Single Color Only Display (Red or Green)
    "OUT" Displayed when digital output is "ON"
  • Panel display shows - Selected units, operation mode,
    output type (n.o. / n.c.), setting mode and key lock
  • Ease of wiring 8 mm 4 Pin Pico Connector ( 2M Mating cable included)
  • CE Marked - RoHs Compliant
Only
Add to cart

Switch Specifications

Numatics DPS / DVS 280 series digital sensors can be used as a digital pressure / vacuum gauge for accurate visual display of the current value. It can also be used as a controls device designed for applications requiring extremely accurate measurement of a specific value, then generating a digital input to the PLC or controls system. The large LCD display is easy to view. It changes color indicating the set point is achieved, causing the digital output to change state. Other features include quick response ( 2.5 ms or less), repeatable to 0.2 % of full scale  1 digit, raised set buttons for simple intuitive programming of the hysteresis or window comparator modes of operation.

Applications include verification of part present, quality assurance using decay leak testing, control of edges on film winding, clamping forces, evacuate and fill circuits, pump up and down circuits and many more

 

2 meter Connection

 

Needs 4-Pin 8mm Cable

Features:

  • Hysteresis and Window comparator modes of operation
  • Large 7 segment LCD display
  • Selectable Two Color Display (Red / Green or Green / Red)
    Large display changes color at set point achieved
  • Selectable Single Color Only Display (Red or Green)
    "OUT" Displayed when digital output is "ON"
  • Panel display shows - Selected units, operation mode,
    output type (n.o. / n.c.), setting mode and key lock
  • Ease of wiring 8 mm 4 Pin Pico Connector ( 2M Mating cable included)
  • CE Marked - RoHs Compliant

Pressure Switch, Sinking (NPN)Switch with 3 meter leads.