Pneumatic Two Hand No Tie Down
REN28-SET
Only
Add to cart
  • Description
  • More

Series REN28-SET
SET OF 2 PALM BUTTONS WITH LOGIC, TWO-HAND NO-TIE-DOWN CONTROL.  WORKING PRESSURE RANGE 60-100 PSI, 40 MICRON FILTERED DRY NONLUBRICATED
              
ONE PALM BUTTON GIVES A MAINTAINED OUTPUT SIGNAL
WHEN BOTH BUTTONS ARE PRESSED WITHIN .3 SECONDS AND HELD.

Pneumatic 2 hand start control. Set of push buttons with integral logic module

REN28

  • Compact design with 1-3/8″ push button (recessed 1/4″).
  • Mounts vertically or horizontally; no mounting bracket required.
  • Light actuation pressure (5 OUNCES).
  • Mounting screws included (10-32).
  • 1/8″ NPT connections.
  • Rounded edges, no sharp edges or corners to injure operator.

The SERIES REN28-SET is two separate palm buttons that use our light touch buttons. Attached to one palm button is our logic module.  They are easy to install: mount securely then connect a supply line to each #1 Port. Next connect #2 to #3 port, port #4 is output.

 

Gives a maintained output signal when both buttons are pressed and held.

PART #s

  • REN28-SET FOR BOTH PALM BUTTONS.
  • REN28-100 PALM BUTTON WITHOUT THE LOGIC MODULE, WHICH MAY BE USED AS A 3-WAY PNEUMATIC PUSH BUTTON

REN28-SET OPTIONS AVAILABLE 

  • -C    Cancelable output. An input from a pressure or limit valve will cancel the output.
  • -PA    .1-30 seconds adjustable pulsed output. The palm buttons must be held the full time
Contact sales@airoil.com for additional information.