Larger picture

Pneumatic Two Hand No Tie Down Systems
REN23
From
Add to cart
  • Description
  • More

SERIES REN23
GIVES A MAINTAINED OUTPUT SIGNAL WHEN BOTH
BUTTONS ARE PRESSED WITHIN .3 SECONDS AND HELD
Working pressure range 60-100 PSI, 
40 Micron Filtered Dry Nonlubricated air
---
Complete two-hand no-tie-down control with buttons on ends

Pneumatic 2 hand start control

The operator must depress two buttons within .3 seconds for obtain a pneumatic output signal

REN23

  • Compact design with 1-3/8″ push button (recessed).
  • Light actuation pressure (5 OUNCES).
  • 1/4″ push lock fittings included.
  • Rounded edges, no sharp edges or corners to injure operator.
  • Quick & simple installation, bolt the control down and plug in.

PART #s

  • REN23-3W     INTERNAL 3-WAY VALVE
  • REN23-4W     INTERNAL 4-WAY VALVE WITH 1.1 CV FACTOR
  • REN23-4WL  REN23-4W WITH A SEPARATE CONNECTION FOR LOGIC MODULE. VERY HEAVY LUBRICATION MAY BE INSERTED IN MAIN SUPPLY.

REN23-3W OPTIONS AVAILABLE 

  • -C     Cancelable output. An input from a pressure or limit valve will cancel the output.
  • -P     .4 second pulsed output.
  • -BPL     Bottom connections.  Connections on bottom of the manifold.
  • -EPB     (EXTRA PUSH BUTTON) A center mounted N/C 3-way valve with button on top (guarded) has separate output marked EPB.
  • -SWV      Switch valve a center mounted toggle diverter valve that diverts the 2-hand output between 2 output ports.

OPTIONS AVAILABLE ON ALL REN 23-3 MODELS 

  • -532      5/32 (4MM) Push lock fittings.(1/4″ standard)
Contact sales@airoil.com for additional information.